Pickup truck owners know that an open truck bed leaves cargo exposed to the elements and potential thieves. That’s why truck bed covers have become a popular accessory.
Two of the most popular brands are BAKFlip and Extang, with their MX4 and Revolver X4S covers respectively. But which one is the better choice for your truck? Let’s take an in-depth look at the pros and cons of each.
Here is a brief comparison table summarizing the key differences between the BAKFlip MX4 and Extang Revolver X4S truck bed covers:
Feature | BAKFlip MX4 | Extang Revolver X4S |
Material | Aluminum + fiberglass panels | Dent-resistant aluminum panels |
Opening | Folds forward | Folds forward or removes easily |
Latches | Exposed | Concealed low-profile design |
Security | Reliable latching system | Integrated lock rods |
Noise | Textured matte underside reduces noise | More wind noise when driving |
Price | $$ | $$$ |
Truck bed covers sit over the bed rails and seal to protect cargo. Most open and close using a folding mechanism, allowing complete access to the bed when needed. Hard folding covers like the MX4 and Revolver X4S have panels made from aluminum or fiberglass. The panels lock together when closed.
Covers attach to the bed using clamps or a rail system. They take less than an hour for most DIY installs. When not being used, most can be removed easily if full truck bed access is needed.
The MX4 is a folding hard cover made from aluminum and fiberglass reinforced polymer panels. The underside is coated with a textured matte finish to reduce noise while driving.
It uses an upgraded latch system from previous BAKFlip covers. The side rails have a low-profile design with no exposed latch hardware on top. Opening and closing is very smooth with the upgraded hinge system.
The cover panels lock when closed to secure the bed. You can drive with the MX4 partially opened and folded forward if you need rear window access.
Extang engineers designed the Revolver X4S for simple operation and security. The cover is made entirely from thick aluminum panels with a dent-resistant texture.
It has a flush-mount paddle latch system integrated into the rails. This provides a sleek exterior with seamless panel gaps when closed. The Revolver X4S hinges allow you to fold it forward or fully remove in minutes.
An added security feature is the dual locking rods on each side. You can lock the tailgate when the cover is closed to prevent theft. The rods pull the panels tight against the seal for a weatherproof fit.
While both covers are well-designed, there are some key differences:
Keeping out the elements is the main job of a truck bed cover. How do the MX4 and Revolver X4S compare?
Convenience features determine how easy the covers are to use:
How well do the covers protect your cargo and equipment from theft or damage? Here are the key factors:
Also Read: Toyota Tundra Platinum Vs. 1794: Which Luxury Truck Is Right?
A truck bed cover is also an aesthetic accessory that alters your truck’s appearance. Here are the styling factors:
With high quality construction, these covers fall on the premium end of the truck bed cover price spectrum:
BAKFlip MX4 | Revolver X4S |
Fiberglass panels resist dents | Dent-resistant aluminum panels |
Low profile rails provide sleek look | Concealed latches give flush exterior |
Textured underside quiets wind noise | Easier full bed access when removed |
Lighter weight than all aluminum | Tight weather seal with lock rods |
Good value at base price point | More secure with locking tailgate option |
Also watch the video!
BAKFlip’s MX4 cover is one of their premium options that offers great durability, easy use, and sleek looks. The G2 is more budget-friendly but has a simpler design. And the FiberMax provides maximum dent resistance.
The main differences are the Revolver X4 is made completely from aluminum while the X2 uses a mix of aluminum and reinforced polymer. The X4 also has an improved flush-mount latch system and integrated lock rods for extra security.
The MX4 uses aluminum panels reinforced with fiberglass. The FiberMax was engineered to be dent resistant with all composite panels. But the FiberMax doesn’t fold completely forward and lacks some convenience features of the MX4.
Yes, the MX4 can be removed completely tool-free in just a couple minutes. You simply release the latch on each panel and lift the cover off the truck. This makes it easy to remove when you need full access to the entire truck bed.
Also Read: Clazzio Vs. Katzkin: The Battle For Premium Automotive Seat Covers
The BAKFlip MX4 and Extang Revolver X4S represent two excellent options for securing your truck bed. For most truck owners, the Revolver X4S is the better overall value. The premium price gets you dent-proof aluminum panels and better protection against theft.
Easier installation and removal are added benefits. But if you want a sleek profile and don’t need regular full bed access, the MX4 is a quality cover for slightly less investment. As long as you choose a reputable brand, you can rest assured your cargo will stay dry and secure.
In the world of luxury home design, few materials can match the elegance and sophistication… Read More
As car enthusiasts, we understand the importance of maintaining the interior of our beloved rides.… Read More
Greetings, fellow string enthusiasts! Whether you're a seasoned violinist or a budding virtuoso, the choice… Read More